VTAP100 PRO NFC reader board - PoE

Physical characteristics

Dimensions: 41mm x 79mm x 22mm (1.61in x 3.11in x 0.87in), with integrated 40mm (1.57in) square antenna
Mounting options: 4 x mounting holes/lugs, also used to connect the two boards of the assembly
Power Supply: 3W Power-over-Ethernet according to IEEE 802.3af or 802.3at
Cable: 0.25m (9.8in) Ethernet cable with overmoulded RJ45 socket; Optional 1.8m (71in) PoE/USB-A captive cable
Weight: 44g (1.6oz) without cable
Operating conditions: -25 to +70°C (-13 to 158°F); 0 to 95% RH non-condensing; optional conformal coating available

NFC Interface

Frequency/standards: 13.56MHz, ISO 14443A/B, ISO 15693 and ISO 18092
Antenna: Integrated 40mm (1.57in) square antenna
Read range: Typically 50mm (2in) depending on environment and phone/card/tag
Mobile wallet compatibility:

Apple Wallet NFC cards (VAS for loyalty/membership/tickets, ECP2 DESFire for Access/ID)
Google Wallet NFC cards (Smart Tap, including extensions, MIFARE2Go DESFire)
Card auto-selection with VAS, ECP2, Smart Tap and DESFire
Express Mode & CDCVM with ECP2
Mobile device type detection
ECC key auto-selection and reporting
Multiple pass type IDs, Apple enrolment URL and Google STUID capture where supported

Card/tag compatibility:

UID/CSN reading from all supported card/tag types including NFC Type 1 (Topaz), Type 2 (MIFARE Ultralight & NTAG), Type 3 (FeliCa), Type 4 (DESFire, T=CL & HCE), Type 5 (ICODE) & MIFARE Classic;
NDEF records from NFC Type 2, 3 & 4;
Block data from MIFARE Classic, Ultralight/NTAG (NFC Type 2) & ICODE (NFC Type 5);
Secure data reading from MIFARE Classic, MIFARE DESFire, MIFARE Ultralight AES.

Other NFC modes: Dynamic NFC format NDEF tag emulation with smart write-back; GymKit handoff; NFC Forum connection handover (CH/TNEP)
Pass IDs: 6 x Apple merchant IDs and 6 x Google collector IDs
Encryption key slots: 6 x ECC key slots (for Apple & Google ID keys); 9 x Application key slots (for MIFARE Classic, DESFire, Ultralight AES and/or OSDP secure channel)
Encryption algorithms: NIST P-256 modes ECDH and ECDSA, HMAC SHA-256, AES-128 and AES-256 in CTR, GCM, CMAC and CBC modes, ANSI-X9.63-KDF & HKDF according to RFC5869 using HMAC-SHA256, key derivation following NXP AN 10922

USB interface

USB device types (can enable/disable as required):

USB Mass storage (for easy configuration, key loading & firmware updates);
Human Interface Device (standard barcode reader/keyboard emulation);
USB Virtual COM port (for configuration, file transfer and command interface, including OSDP over USB COM)

Network interface

IP connectivity: Ethernet - 10BASE-T/100BASE-TX connection (IEEE 802.3 compliant) to internet, DHCP and fixed IP
Tap processing: Tap and reader ID data can be routed to any target application/API endpoint, on a local, per-reader or per-fleet basis, using either standard or customised integrations

Other features

Operator feedback: Buzzer and LED provide device status and tap transaction feedback from reader and/or connected device/application, with customised colours and buzzer frequency and sequences
Reader management: Either USB/serial interface using configuration text files that can be locked and encrypted firmware file for field upgrades or VTAP Cloud service enables secure remote configuration of Apple and Google pass parameters and ECC keys for readers and fleets with automatic firmware updates
Input/Output options: Built in serial RS-232 interface provides external barcode scanner input if required; Optional VTAP100 PRO I/O expansion board (VTAP100-PRO-EXP1) provides 2 relays, 1 input and can drive up to 255 serial RGB LEDs from reader and/or target tap application

Compliance / Certification

Apple VAS, Apple ECP2/Access, Google Smart Tap, UKCA, CE, FCC, ISED, RoHS; Will require certification tests in final enclosure to meet Apple ECP2 requirements, according to your use.

Manufacturer's part number: VTAP100-PRO-POE-OEM
Country of origin: UK
HSF code: 8471900000

Manufacturer: Dot Origin (www.vtapnfc.com)

Connection Method: Other


More info : Readers	Close
VTAP100 PRO NFC reader board - PoE Physical characteristics Dimensions: 41mm x 79mm x 22mm (1.61in x 3.11in x 0.87in), with integrated 40mm (1.57in) square antenna Mounting options: 4 x mounting holes/lugs, also used to connect the two boards of the assembly Power Supply: 3W Power-over-Ethernet according to IEEE 802.3af or 802.3at Cable: 0.25m (9.8in) Ethernet cable with overmoulded RJ45 socket; Optional 1.8m (71in) PoE/USB-A captive cable Weight: 44g (1.6oz) without cable Operating conditions: -25 to +70°C (-13 to 158°F); 0 to 95% RH non-condensing; optional conformal coating available NFC Interface Frequency/standards: 13.56MHz, ISO 14443A/B, ISO 15693 and ISO 18092 Antenna: Integrated 40mm (1.57in) square antenna Read range: Typically 50mm (2in) depending on environment and phone/card/tag Mobile wallet compatibility: Apple Wallet NFC cards (VAS for loyalty/membership/tickets, ECP2 DESFire for Access/ID) Google Wallet NFC cards (Smart Tap, including extensions, MIFARE2Go DESFire) Card auto-selection with VAS, ECP2, Smart Tap and DESFire Express Mode & CDCVM with ECP2 Mobile device type detection ECC key auto-selection and reporting Multiple pass type IDs, Apple enrolment URL and Google STUID capture where supported Card/tag compatibility: UID/CSN reading from all supported card/tag types including NFC Type 1 (Topaz), Type 2 (MIFARE Ultralight & NTAG), Type 3 (FeliCa), Type 4 (DESFire, T=CL & HCE), Type 5 (ICODE) & MIFARE Classic; NDEF records from NFC Type 2, 3 & 4; Block data from MIFARE Classic, Ultralight/NTAG (NFC Type 2) & ICODE (NFC Type 5); Secure data reading from MIFARE Classic, MIFARE DESFire, MIFARE Ultralight AES. Other NFC modes: Dynamic NFC format NDEF tag emulation with smart write-back; GymKit handoff; NFC Forum connection handover (CH/TNEP) Pass IDs: 6 x Apple merchant IDs and 6 x Google collector IDs Encryption key slots: 6 x ECC key slots (for Apple & Google ID keys); 9 x Application key slots (for MIFARE Classic, DESFire, Ultralight AES and/or OSDP secure channel) Encryption algorithms: NIST P-256 modes ECDH and ECDSA, HMAC SHA-256, AES-128 and AES-256 in CTR, GCM, CMAC and CBC modes, ANSI-X9.63-KDF & HKDF according to RFC5869 using HMAC-SHA256, key derivation following NXP AN 10922 USB interface USB device types (can enable/disable as required): USB Mass storage (for easy configuration, key loading & firmware updates); Human Interface Device (standard barcode reader/keyboard emulation); USB Virtual COM port (for configuration, file transfer and command interface, including OSDP over USB COM) Network interface IP connectivity: Ethernet - 10BASE-T/100BASE-TX connection (IEEE 802.3 compliant) to internet, DHCP and fixed IP Tap processing: Tap and reader ID data can be routed to any target application/API endpoint, on a local, per-reader or per-fleet basis, using either standard or customised integrations Other features Operator feedback: Buzzer and LED provide device status and tap transaction feedback from reader and/or connected device/application, with customised colours and buzzer frequency and sequences Reader management: Either USB/serial interface using configuration text files that can be locked and encrypted firmware file for field upgrades or VTAP Cloud service enables secure remote configuration of Apple and Google pass parameters and ECC keys for readers and fleets with automatic firmware updates Input/Output options: Built in serial RS-232 interface provides external barcode scanner input if required; Optional VTAP100 PRO I/O expansion board (VTAP100-PRO-EXP1) provides 2 relays, 1 input and can drive up to 255 serial RGB LEDs from reader and/or target tap application Compliance / Certification Apple VAS, Apple ECP2/Access, Google Smart Tap, UKCA, CE, FCC, ISED, RoHS; Will require certification tests in final enclosure to meet Apple ECP2 requirements, according to your use. Manufacturer's part number: VTAP100-PRO-POE-OEM Country of origin: UK HSF code: 8471900000 Manufacturer: Dot Origin (www.vtapnfc.com) Connection Method: Other