VTAP25 embedded NFC reader module - USB & Serial

Physical characteristics

Dimensions: 24mm x 29.3mm x 5.9mm (0.95in x 1.15in x 0.23in) to use with external antenna
Power Supply: 3.3V or 5V DC
Mounting options: Surface mount module, supplied in trays
Operating conditions: -40 to +85°C (-40 to 185°F); 0 to 95% RH non-condensing
Country of origin: Designed and manufactured in the UK

NFC Interface

Frequency/standards: 13.56MHz, ISO 14443A/B, ISO 15693 and ISO 18092
Antenna(s): Requires external antenna and tuned matching circuit. Development kit includes tuned reference 40mm square antenna as well as unpopulated tuning circuit for alternatives.
Read range: Depends on antenna shape and size - typically 50mm (2in)
Mobile wallet compatibility:

Apple Wallet NFC cards (VAS for loyalty/membership/tickets, ECP2 DESFire for Access/ID)
Google Wallet NFC cards (Smart Tap, including extensions, MIFARE2Go DESFire)
Card auto-selection with VAS, ECP2, Smart Tap and DESFire
Express Mode & CDCVM with ECP2
Mobile device type detection
ECC key auto-selection and reporting
Multiple pass type IDs, Apple enrolment URL and Google STUID capture where supported

Card/tag compatibility:

UID/CSN reading from all supported card/tag types including NFC Type 1 (Topaz), Type 2 (MIFARE Ultralight & NTAG), Type 3 (FeliCa), Type 4 (DESFire, T=CL & HCE), Type 5 (ICODE) & MIFARE Classic;
NDEF records from NFC Type 2, 3 & 4;
Block data from MIFARE Classic, Ultralight/NTAG (NFC Type 2) & ICODE (NFC Type 5);
Secure data reading from MIFARE Classic, MIFARE DESFire, MIFARE Ultralight AES.

Other NFC modes: Dynamic NFC format NDEF tag emulation with smart write-back; GymKit handoff; NFC Forum connection handover (CH/TNEP); low power mode
Pass IDs: 6 x Apple merchant IDs and 6 x Google collector IDs
Encryption key slots key slots: 6 x ECC key slots (for Apple & Google ID keys); 9 x Application key slots (for MIFARE Classic, DESFire, Ultralight AES and/or OSDP secure channel)
Encryption algorithms: NIST P-256 modes ECDH and ECDSA, HMAC SHA-256, AES-128 and AES-256 in CTR, GCM, CMAC and CBC modes, ANSI-X9.63-KDF & HKDF according to RFC5869 using HMAC-SHA256, key derivation following NXP AN 10922

Security

Security in hardware: Programmable EAL6+ secure element (SE050)

USB interface

USB device types (can enable/disable as required):

USB Mass storage (for easy configuration, key loading & firmware updates);
Human Interface Device (standard barcode reader/keyboard emulation);
USB Virtual COM port (for configuration, file transfer and command interface, including OSDP over USB COM)

Connection methods: USB powered, 3.3V powered with VBUS detection
Operating system support: Windows, Linux, MacOS full support for keyboard emulation, virtual COM device and mass storage; Android support for keyboard emulation, virtual COM device; iPhone and iPad support

Serial interface

Serial interface types: Primary UART, secondary UART, SPI slave, I2C slave - all 3.3V
Serial mode features: External barcode scanner input, VTAP command and OSDP modes, including support for secure configuration, encryption key & firmware updates from host processor. Sleep mode.

Other features

Operator feedback: Buzzer output signal (3.3V logic) for AC sounder, configurable note sequences on startup and card/pass read. External serial LED output (3.3V logic) configurable colours on startup and card/pass read.
Wake up: External wake input and output pins to manage sleep (low power) modes
Reader management: USB/serial interface using configuration text files that can be locked and encrypted firmware file for field upgrades
Development kit: Comprehensive reference design board with removable reference and external antenna options

Compliance / Certification

Apple VAS, Apple ECP2/Access, Google Smart Tap, RoHS, UKCA, CE, FCC, ISED, MIC; Requires certification tests with chosen antenna, according to your application

Manufacturer's part number: VTAP25-MOD
Country of origin: UK
HSF code: 84716070

Manufacturer: Dot Origin (www.vtapnfc.com)

Connection Method: Other


More info : Readers	Close
VTAP25 embedded NFC reader module - USB & Serial Physical characteristics Dimensions: 24mm x 29.3mm x 5.9mm (0.95in x 1.15in x 0.23in) to use with external antenna Power Supply: 3.3V or 5V DC Mounting options: Surface mount module, supplied in trays Operating conditions: -40 to +85°C (-40 to 185°F); 0 to 95% RH non-condensing Country of origin: Designed and manufactured in the UK NFC Interface Frequency/standards: 13.56MHz, ISO 14443A/B, ISO 15693 and ISO 18092 Antenna(s): Requires external antenna and tuned matching circuit. Development kit includes tuned reference 40mm square antenna as well as unpopulated tuning circuit for alternatives. Read range: Depends on antenna shape and size - typically 50mm (2in) Mobile wallet compatibility: Apple Wallet NFC cards (VAS for loyalty/membership/tickets, ECP2 DESFire for Access/ID) Google Wallet NFC cards (Smart Tap, including extensions, MIFARE2Go DESFire) Card auto-selection with VAS, ECP2, Smart Tap and DESFire Express Mode & CDCVM with ECP2 Mobile device type detection ECC key auto-selection and reporting Multiple pass type IDs, Apple enrolment URL and Google STUID capture where supported Card/tag compatibility: UID/CSN reading from all supported card/tag types including NFC Type 1 (Topaz), Type 2 (MIFARE Ultralight & NTAG), Type 3 (FeliCa), Type 4 (DESFire, T=CL & HCE), Type 5 (ICODE) & MIFARE Classic; NDEF records from NFC Type 2, 3 & 4; Block data from MIFARE Classic, Ultralight/NTAG (NFC Type 2) & ICODE (NFC Type 5); Secure data reading from MIFARE Classic, MIFARE DESFire, MIFARE Ultralight AES. Other NFC modes: Dynamic NFC format NDEF tag emulation with smart write-back; GymKit handoff; NFC Forum connection handover (CH/TNEP); low power mode Pass IDs: 6 x Apple merchant IDs and 6 x Google collector IDs Encryption key slots key slots: 6 x ECC key slots (for Apple & Google ID keys); 9 x Application key slots (for MIFARE Classic, DESFire, Ultralight AES and/or OSDP secure channel) Encryption algorithms: NIST P-256 modes ECDH and ECDSA, HMAC SHA-256, AES-128 and AES-256 in CTR, GCM, CMAC and CBC modes, ANSI-X9.63-KDF & HKDF according to RFC5869 using HMAC-SHA256, key derivation following NXP AN 10922 Security Security in hardware: Programmable EAL6+ secure element (SE050) USB interface USB device types (can enable/disable as required): USB Mass storage (for easy configuration, key loading & firmware updates); Human Interface Device (standard barcode reader/keyboard emulation); USB Virtual COM port (for configuration, file transfer and command interface, including OSDP over USB COM) Connection methods: USB powered, 3.3V powered with VBUS detection Operating system support: Windows, Linux, MacOS full support for keyboard emulation, virtual COM device and mass storage; Android support for keyboard emulation, virtual COM device; iPhone and iPad support Serial interface Serial interface types: Primary UART, secondary UART, SPI slave, I2C slave - all 3.3V Serial mode features: External barcode scanner input, VTAP command and OSDP modes, including support for secure configuration, encryption key & firmware updates from host processor. Sleep mode. Other features Operator feedback: Buzzer output signal (3.3V logic) for AC sounder, configurable note sequences on startup and card/pass read. External serial LED output (3.3V logic) configurable colours on startup and card/pass read. Wake up: External wake input and output pins to manage sleep (low power) modes Reader management: USB/serial interface using configuration text files that can be locked and encrypted firmware file for field upgrades Development kit: Comprehensive reference design board with removable reference and external antenna options Compliance / Certification Apple VAS, Apple ECP2/Access, Google Smart Tap, RoHS, UKCA, CE, FCC, ISED, MIC; Requires certification tests with chosen antenna, according to your application Manufacturer's part number: VTAP25-MOD Country of origin: UK HSF code: 84716070 Manufacturer: Dot Origin (www.vtapnfc.com) Connection Method: Other