IDBridge CT30 USB smartcard reader
Product:
Credential type(s): Contact
Form factor: Portable
Connector: USB CCID (Standard 2.0 Type A connector)
OS support: Up to Windows 11 (including 7, 8.1), Linux, MacOS; drivers available from
Thales Customer Support Portal Contact Smartcard Interface:
Contact interface standard: ISO 7816
Contact card types: Processor cards (T=0 and T=1)
Card Voltage 5V, 3V & 1.8V
Data transmission protocol: T=0 / T=1
Card contacts: Sliding
Contact read/write speed: 2kbps - 826kbps
Clock frequency: 4.8MHz
Card insertion cycles: Min 100 000
Host Interface:
Host interface standards: PC/SC
Host data transmission speed (wired): 12 Mbps (USB full speed)
Other Features:
Card detection: Card insertion/extraction detection, Short circuit protection
Status indicator: Green LED with dual state (waiting and operation)
An additional desktop stand is available as an accessory.
Certifications:
Manufacturer's warranty: 2 year
Type approvals: CE, FCC part 15, RoHS 2, REACH, WEEE, IEC 60950, c-Tick
Application approvals: EMV Level 1 (Contact), c-Tick (Australia), VCCI (Japan), BSMI (Taiwan)
Country of origin: China
Physical:
Dimensions: 74 x 63 x13mm (2.9 x 2.5 x 0.5in)
Weight (±5%): 55g (1.9oz)
Cable length supplied: 1.5m (59.1in)
Power:
Operating current: Less than 200microA (in suspend mode)
Battery power option: No
Environment:
Operating temperature: 0 to 55degC (32 to 131degF)
Storage temperature: 0 to 70degC (32 to 158degF)
Operating humidity: 10-95% RH (non-condensing)
Manufacturer's part number: 962-000009-004
Country of origin: China
HSF code: 8471900000
The picture below shows the IDBridge CT30 with a stand (part number HWP109380).
Manufacturer: Thales
Connection Method: USB
Search
+44 (0)1428 685 250
stock
